설치편하고 감기좋은 데이토나 스로틀입니다 너무좋아서 2개나 구입했습니다감기편하고 즉각적으로 반응해서 너무나좋았습니다단점이 거의 없다고 생각합니다 의심없이 사용하시면 될거같습니다 가격대비 너무좋은 제품이라 생각합니다
View Detail
- Sale
- Instock
37.77 SGD (4,360 JPY) 41.58 SGD Save 9%
Webike Point: +44 pt
(0.38 SGD)
Delivery Information
In Stock, Ships within 24 hours.
Estimated arrival date around
Product detail
[Compatibility] Φ20-Φ28 Big Carbs (PE, PWK, VM, PC, CR-mini, VM, Yoshimura YD24/28)
[Size]
Outer Length: 760mm
Winding Radius: 29mm
[Specification]
・It supports up to Daytona RideBar (MID) with 760mm (29240)
・Grip end penetration type
**APE needs to be converted to disc brakes.
*APE requires a separate brake lever holder.
<
*After installing the product, it is necessary to drain the oil in the oil pump and to block the oil inlet on the carburetor manifold side.
*When using this product on the TZR50/R and TZM50R, the cable length is not long enough for the stock carburetor, so it is necessary to replace it with a big carburetor.
*There may be changes in product specifications due to the manufacturer's reasons..
Φ20-Φ28 Designed for optimum take-up of various big cabs!
Φ20-Φ28 Super high throttle kit designed for the optimum take-up volume for various big cabs (PE, PWK, VM, PC, CR-mini, VM, Yoshimura YD24/28).
In the case of the Φ28 carburetor, it takes about 55 degrees of rotation to fully open.
For use with the NSR50 and NS-1, it can be used with either the stock carburetor or the Daytona big carburetor kit.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
New arrivals in used
New arrivals in used
Customer Reviews
Reviews with image
![[Webike Monitor] It followed on DISC-izing the <br>APE, and since the pure Throttle housing needed to be removed, it purchased.
The <br>carburetor is using Yoshimura TM-MJNphi24 CARBURETOR.
The <br>price became a conclusive factor which cheap one chooses](https://img.webike-cdn.net/photo/article/23/1342268382223M.jpg)
![It is cheap anyway! Although other high throttle kits are the prices to which Yukichi flies from door to door, this product is a value price fairly. <br>Bad, whatever it may also say a result of a product to a thing, no one but [ high throttle ] and its th](https://img.webike-cdn.net/photo/article/37/1276258465037M.jpg)
![Although it was with the object for the monkeys, it was used for APE. <br>When and it remained as it is, it was in the state where a throttle does not return -- [ be / the purchased lot / a blank ] [ a part of color ] [ the crack ] <br>Since there was no t](https://img.webike-cdn.net/photo/article/28/1218372713428M.jpg)
Installed on: HONDA APE100 TYPE D
Dec 21, 2021
I bought this High Throttle for my Honda RS150 that fits perfectly. The quality of the item and the finish is great. I have to modify the item as i instaled it in a throttle body rather than the carb recommended but it still fit fine. This is cheap throttle an alternative throttle for a premium throttle. The item is package nicely. It was ship wraped in bubblewrap so item is protected. Make sure that the length of the cable is compatible witj the motorbike your going to use.
View Detail
Helpful?
Apr 25, 2021
High Solo with the best cost performance
Not suitable for street youth.
For Circuit.
Reason:Because it is difficult to adjust Speed with Throttle alone.
Helpful?
Jan 4, 2021
I thought that it was good for the repair measure of the accelerator wire off of my friend's SUPER CUB C50 modified 124ccPipe HandlebarSpec. and introduced it.
The carburetor and accelerator wire of a certain Horizontal TypeEngine 124cc Full kit became bad, and the carburetor was changed to YD28.
The taking out position was changed, and it became better temporarily, and it was relieved.
However, when I heard that Axel didn't return after switching back, and I visited to check, I found that there was a dislocation of the Accelerator Wire attachment part of the Switch box original.
I have repaired and adjusted the handlebar many times, but the angle of the handlebar cut, the length of the wire, and the position of the fitment were not good, so I gave up and considered a new installation.
I picked up a few kits that are hard to remove, easy to adjust, have long guide wire, high solo, and repair parts available, and have standard long wire that corresponds to the length of CUB frame.
At any rate, I'll replace the Grip at his request, and until he has more time. "Take the Small stuff home and work out the tentative matches and Ideas. So, I worked on it.
This is a perfect feeling. I'm looking forward to installing everything into the car and driving it in the real world.
Helpful?
Jun 11, 2017
It was the same product until now but Wire was somewhat elongated so I purchased it as a spare.
Since 2 St Parts are decreasing, I think that I want to use it for Large.
Helpful?
New Custom Articles
