About quality and texture
Было куплено две лампы для применения в своих скутерах, не хотелось, чтобы были дополнительные блоки и провода, эта лампа включает в себя все нужные компоненты, стабилизаторы и драйвера для управления мощными светодиодами, простая установка без лишних проблем
About the feeling of use
После установки в стандартное место и запуска двигателя лампа сразу включилась и начала корректно работать, на холостых оборотах около 1800-2000 присутствует небольшое мерцание света, но производитель предупреждает об этом заранее, так как это особенность работы при переменном токе, далее при наборе оборотов мерцание изчезает и мы видим ровный свет с температурой 6000К, это правда, цвет сине-белый, как и должен быть, достаточно яркий и хорошо освещающий дорогу даже на ближнем свете
Ближний свет на это лампе использует 2 LED с каждой стороны лампы, а дальний все 4 LED на каждой стороне
Стоит отметить, что дальний свет не просто яркий, а слишком яркий и без настройки фары обойтись никак нельзя
Products to buy together
Совместно с лампой ничего покупать не требуется
Difficulty of installation
Легчайшая установка на место стандартной лампы, полная совместимость продуктов
Cost performance and comparison with other products
Цена ниже, чем лампы более высокого класса с дополнительными блоками, однако, разница не так велика, яркость достаточна для скутера и передвижения ночью
About shipping and packaging
Упаковка производителя есть мягкий блистер, но с перевозкой проблем не возникло, повреждений не было замечено
Any concerns, cautions, or advice when purchasing
Всегда осуществляйте настройку фар после установки подобного типа LED ламп, иначе помимо плохо освещения дороги возможно ослепление встречных водителей
----------------------------------------------------------About Quality and TextureTwo lamps were bought for use in their scooters, I did not want to have additional blocks and wires, this lamp includes all the necessary components, stabilizers and drivers to manage powerful LEDs, a simple installation without unnecessary problemsAbout the Feeling of UseAfter installing in the standard place and starting the engine, the lamp immediately turned on and began to work correctly, at idle about 1800-2000 there is a slight flicker of light, but the manufacturer warns about this in advance, as this feature of the work at alternating current, then the flicker from the speed of revolutions. And we see a smooth light with a temperature of 6000k, it is true, the color is blue-white, as it should be, a fairly bright and well illuminating road even in the near lightThe near light on this lamp uses 2 LED on each side of the lamp, and the long -range all 4 LED on each sideIt is worth noting that the high beam is not just bright, but too bright and without tuning the headlight can not do in any wayProducts to Buy TogetherTogether with the lamp, nothing needs to be boughtDifficulty of InstallationThe lightest installation in the place of a standard lamp, complete compatibility of productsCOST Performance and Comparison with Other ProductsThe price is lower than the lamps of a higher class with additional blocks, however, the difference is not so great, brightness is sufficient for a scooter and movement at nightABOUT SHIPPing and PACKAGINGThe manufacturer’s packaging is a soft blister, but there were no problems with transportation, no damage was noticedAny Concerns, Countions, Or Advice When PurchacingAlways set up headlights after installing this type of LED lamps, otherwise, in addition to poorly lighting the road, it is possible to blind oncoming driversPowered by Google Translator
- Instock
27.24 SGD (3,150 JPY)
Delivery Information
In Stock, Ships within 24 hours.
Estimated arrival date around
FITMENT
-
DIO FIT
-
JOGPetit
07-17 CE50 series '07.10-'17
-
MATE50
00- 3AC7-/4AT6-
-
JOG Zr
07-17 CE50 series '07.10-'17
-
JOGDX
07-17 CE50 series '07.10-'17
See all
YAMAHA
-
ADDRESSV125G
-
LETS IICombination brakes
99- '99.3-
-
ADDRESSV125
-
LETS II
99- '99.3-
See all
SUZUKI
Product detail
■Shape: For PH12
■1 piece (blister pack)
[Product Specification]
・For mopeds, 12V models only
・Power consumption: Approx. 5 W for both high and low
・Can be used in both DC and AC powered vehicles (AC/DC dual power supply compatible)
・White color, color temperature 6000K High beams are "plus-on high beams" that are turned on at the same time as the low beams
・Luminous flux 800-600Lm, equivalent to 35-30w class halogen bulb for mopeds
**A part of the total length of this product (the part corresponding to the glass of the bulb) is longer than that of a stock bulb.Therefore, the tip of the product may hit the lens of the lamp on the side of the vehicle, making it impossible to install in some models.Please refer to the dimensional drawing to confirm the depth of the vehicle side lamp in advance before purchase.
*Some models such as the Monkey and Ape cannot be installed due to their longer dimensions than the stock bulbs.
*Some other products are included in the image.
*There may be changes in product specifications due to the manufacturer's reasons..
PonLED is a series of entry model LED head bulbs for mopeds that can be used not only by custom and dress-up users, but also by users who demand replacement bulbs.
[Features]
Easy to install, quick and easy to install.
2. 8 types of wide variations for most of current and old bikes.
Price range equivalent to that of affordable halogen bulbs.
Ultra-low power consumption of approximately 5/5W, only 20% or less than that of stock bulbs.
Sharp, pure white light and the new "Plus On High Beam" mechanism improve visibility.
The 6000K pure white light and the new "Plus-On High Beam" mechanism, which simultaneously turns on low beams when high beams are in use, provide bright, easy-to-see illumination from the feet up and increase visibility.
[Moped LED headlight bulb PonLED]
All-in-one LED headlight bulb with no wiring required
■Easy for anyone to install, just replace the stock bulbs!No messy wiring at all!
PonLED is an all-in-one type with a built-in controller and is easy to install because its mouthpiece is the same shape as a stock bulb.
There is no troublesome wiring.
This is an entry model LED headlight bulb for mopeds that can be converted to an LED headlight by simply replacing the stock bulb.
■12V for moped motorcycle Both DC and AC are OK!Fits many models
It is compatible with both direct current (DC) and alternating current (AC) power sources, so it can be used with most mopeds.
There is no need to find out or worry about whether your bike is DC or AC.
Eight wide variations, unique to M & H, are available to fit many models.(Some not yet released)
■Low power consumption of approximately 5W, which is battery-friendly
Low power consumption of approximately 5W for both high and low beams.
This is a great advantage for vehicles with additional electrical equipment such as heated grips, or for lower year vehicles that were originally weak in power generation.
■Plus-on high beams are bright even in the foreground
When switching to high beam, the high beam is "plus-on" while the low beam remains on.
Both high and low lights are on at the same time, keeping the front bright and illuminating the distance.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.