23년형 카타나 팬더리스 튜닝하고 홀이 허전해서 주문하게 되었습니다주문전에는 고민많이 했는데 물건 수령하고 보니 아주 마음에 듭니다요시무라 제품답게 만듭새가 훌륭합니다. 믿고 주문해도 될것 같습니다사진에서 보는거와는 달리 크기가 작아서 좀 놀라긴 했습니다
View Detail
- Instock
63.95 SGD (7,382 JPY)
Webike Point: +74 pt
(0.64 SGD)
Delivery Information
In Stock : 4 left, Ships within 24 hours.
Estimated arrival date around
Product detail
[Color]
Slate gray (anodized finish)
[Specification]
Machined aluminum
laser marking
**There may be changes in product specifications due to the manufacturer's reasons.
*Installation requires the use of Suzuki stock bolts (Suzuki stock part number: 09139-06221 / Screw, front fender front) is required for 2 pieces.This bolt is also included in the stock rear fender.Please refer to the image..
Beautifully dress up the screw holes caused by the removal of the stock rear fender.
Fasten with the stock bolts from the back side.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
New arrivals in used
New arrivals in used
Customer Reviews
Reviews with image
Fits:SUZUKI KATANA 19-21
Installed on: SUZUKI KATANA
Fits:SUZUKI KATANA 19-21
Jan 28, 2022
When I installed the Fender Eliminator, there was an opening in the Swing Arm for the OEM license plate. As I expected, Yoshimura was selling an Exactly Cap set for it, so I bought it.
It looks so much better now!
However, I didn't know that I needed two SEA BASSOEM Bolts to install that Cap, so I had to buy another OEM Bolt after the product arrived.
I would have given it 5 stars if it was included from the beginning.
Installation is easy, with only a narrow space on the Sprocket side.
Helpful?
Fits:SUZUKI KATANA 19-21
May 5, 2020
I'm all about high quality anyway!
If you use the Fender Eliminator Kit, you can use the Swing Arm The OEMBracket mounting holes are left in place, and it's not as if the You're out I chose Yoshimura's Boss Cap because it looks uncool
It is important to note that there are some bolts that have a similar shape, so make sure you choose the OEM bolts or else you'll get a It will not be fixed in place Also, the material:Because it is like an aluminum product, there is a feeling that the hexagonal hole is damaged when it is tightened with full force It seems to be good to apply Screw lock and fasten in moderation I am very happy with the quality
Helpful?
Fits:SUZUKI KATANA 19-21
Apr 12, 2020
Recommended for those who have installed the Fender Eliminator Kit by YOSHIMURA
The Swing that I removed when I installed the Fender Eliminator Kit This is a product to plug the holes in ArmFender
Aluminum alloy cut-out for quality, color and appearance
The word YOSHIMURA is marked, so you can see the word "YOSHIMURA" This would be especially good for those who have installed the Fender Eliminator Kit
When installing the Swing ArmFender, the Bolt that comes out when removing the NORMAL Swing ArmFender is removed Use
Insert the product into the screw on the Swing Arm and put the above reused bolts from the back It is installed by pinching and tightening, but Sprocket interferes with the rear side I think it's a little hard to tighten the Wheel with it in place
I'm a Long Hexagonal Wrench with a balled tip, and putting it back together is a I applied a little bit of medium-strength screw lock to prevent it from coming off by vibration and tightened it up It was
When you install the Yoshimura logo, make sure it's in the same position as the other two
Helpful?
Fits:SUZUKI KATANA 19-21
Mar 22, 2020
A little expensive, but I would recommend it to anyone who has replaced it with a Fender-less one
After replacing it with a Fender-less, I was concerned about the holes in the Swing Arm, so I bought it as soon as I could
I am satisfied with the beautiful finish, as expected of a Yoshimura
You can use the screws of the removed License Plate Bracket for installation However, because the screw on the Stem shaft side is narrower than the Sprocket, the A It was a little hard to close
Helpful?
New Custom Articles
