This lever guard screams quality. The machining is clean, the finish is top-notch, and it fits my bike perfectly. It’s not just functional — it adds a sleek, race-inspired touch to the front end. Worth every penny.Very lightweight but strong. It didn’t interfere with any controls, and installation was simple. I appreciate the attention to detail — everything from the design to the packaging reflects Yoshimura’s high standards.
View Detail
114.35 ~ SGD (13,200 JPY)
Webike Point: +132~ pt
(1.14 SGD)
Delivery Information
-
Please select product form first.
FITMENT
HONDA
-
CB1300SB
21-24
-
CB1300SF
21-24
-
CB1300SF
21 Φ16
-
CB1300SB
21 Φ16
See all
HONDA
YAMAHA
-
XMAX
22-24 *M6xΦ12.5 washer and M6 bolt (30mm) are required separately
-
CYGNUS GRYPHUS
22
-
MT-125
23 Φ16
-
MT-03
18 Φ16
See all
YAMAHA
SUZUKI
-
GSX-R1000
16 Φ16
-
GIXXER SF250
19-23 Φ16
-
GSX-S1000
15-21 Φ16
-
GSX-R125
18-23 M6X12.5 washer and M6 bolt (40mm) are required separately. Therefore, either Φ14 or Φ16 size can be installed.
See all
SUZUKI
KAWASAKI
-
Ninja650
21 Φ16
MV AGUSTA
Open Fit Model Information Table
-
F3 675
14 Φ16
-
F3 800
20
-
F3 800 RC
20 Φ16
Product detail
[Material]
Base part:Machined aluminum
Tip arm:resin
[Set components]
・Aluminum base (Part No.697-002-*010) x 1 piece
・Resin arm (Part No.697-002-4020) x 1pc
・Spacer 15mm (Part No.697-002-4030) x 1pc
・Spacer 10mm (Part No.697-002-0040) x 1pc
・Inner assy (Part No.697-002-4*50) x 1 pcs.
・Ultra-low head bolt M5 (Part No. 800-795-3010) x 2pc
**Aluminum base "*" is a color number:1=Red,2=Blue,5=Slate Grey,6=Gold,7=Lime Green
*The * on the Inner Assy is the size number:4=Φfor 14,6=Φfor 16
*It may be necessary to remove the stock inner weight.
*Please check each race regulation when you use it in the race.
*The image may contain other colors.
*The vehicle in the image is a demo vehicle and the steering wheel has been changed.
*There may be changes in product specifications due to the manufacturer's reasons.
.
* The image is only for reference. The image shown may differ from the actual product.
The brake lever guard is a safety part that is required by recent race regulations because it effectively prevents the brake from malfunctioning due to contact with other vehicles.
・The base part that extends from the bar end is machined aluminum, and the Yoshimura logo is laser engraved.
・The Yoshimura logo is embossed on the resin arm.
・The hybrid structure of aluminum and resin ensures both strength and weight reduction.
In case of damage, each part can be replaced.
・Available in red, slate gray and gold anodized colors.
・Available for Φ14 for handlebar inner diameter 14-15.5mm and for Φ16 for handlebar inner diameter 16-18.7mm.
Suitable for a wide range of vehicles.
・Weighted inner parts are used to reduce vibration of the handle.
By using the supplied Φ15mm (black anodized aluminum) and Φ10mm (silver) spacer collars, it is possible to install it in the best position to avoid interference with the throttle and brake levers.
■The length from the handlebar to the end of the arm can be selected from two positions.
・Resin arm mounting position :Length from handlebar to end of arm :120mm)
・Resin arm mounting position :Length from handlebar to end of arm:145mm)
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
New arrivals in used
New arrivals in used
Customer Reviews
Reviews with image
Fits:YAMAHA YZF-R15 23 Φ16, YAMAHA YZF-R25 14-19 Φ16, YAMAHA YZF-R3 14 Φ16, SUZUKI GSX-S1000 24, YAMAHA XMAX 22-24 *M6xΦ12.5 washer and M6 bolt (30mm) are required separately
Installed on: SUZUKI GSX1000S Katana
Fits:YAMAHA YZF-R15 23 Φ16, YAMAHA YZF-R25 14-19 Φ16, YAMAHA YZF-R3 14 Φ16, SUZUKI GSX-S1000 24, YAMAHA XMAX 22-24 *M6xΦ12.5 washer and M6 bolt (30mm) are required separately
Installed on: HONDA CB400SF (Super Four)
Jun 3, 2025
Easy to install light weight and good quality feel to it.Not only to protect the brake lever also make the bike look great overall.A little expensive but worth it.
View Detail
Helpful?
Fits:YAMAHA YZF-R15 23 Φ16, YAMAHA YZF-R25 14-19 Φ16, YAMAHA YZF-R3 14 Φ16, SUZUKI GSX-S1000 24, YAMAHA XMAX 22-24 *M6xΦ12.5 washer and M6 bolt (30mm) are required separately
Installed on: HONDA Monkey 125
Mar 10, 2024
OVER RACING : Sports Riding Handlebar Kit ∅ 14
Aluminum gives points to each color. And it can also protect the brakes when the bike falls. You have to buy a clutch guard or a handle Accessory Bar Ends because it only consists of a brake guard. Installation is easy as long as it fits the size. Delivery and packaging to WeBike in a week The packaging is expensive because it only costs a great brake guard. However, the quality is high
View DetailHelpful?
Fits:YAMAHA YZF-R15 23 Φ16, YAMAHA YZF-R25 14-19 Φ16, YAMAHA YZF-R3 14 Φ16, SUZUKI GSX-S1000 24, YAMAHA XMAX 22-24 *M6xΦ12.5 washer and M6 bolt (30mm) are required separately
Installed on: HONDA CB400SF (Super Four)
Feb 20, 2024
Expensive But Good Quality Guard
I purchased this guard after the bike skidded. Although it was a minor mishap without any injuries. I damaged the brake lever and it didn't brake as smoothly as it originally did.Moving forward, I decided that if I happen to tip over the bike or have any mishaps, this brake lever guard was going to bear the brunt of the impact. When I unboxed it, the feel of it and build quality impressed me and indeed could see where the cost went to. I wanted to buy a clutch lever guard but unfortunately Yoshimura did not make them. It would have completed the look.I would recommend this product to someone who wish to protect their bike from those accidental tip over scenarios.
View Detail
Helpful?
Fits:YAMAHA YZF-R15 23 Φ16, YAMAHA YZF-R25 14-19 Φ16, YAMAHA YZF-R3 14 Φ16, SUZUKI GSX-S1000 24, YAMAHA XMAX 22-24 *M6xΦ12.5 washer and M6 bolt (30mm) are required separately
Installed on: SUZUKI GSX-R150
Jan 15, 2024
The brake lever guard looks sleek and material are of high quality expected from yoshimura. Sadly they don't make a clutch lever guard too. It would be great if they have it so it would look symmetrical on the bike.
View DetailHelpful?
New Custom Articles
