*As using the Grip Warmer, please make sure to wear gloves. *Do not use the Grip Warmer on the high power setting when the outside temperature is above 20°C. *As the grip is worn out or damaged, stop using the grip warmer and replace the grip. *A wire lead is required separately. *Please prepare the rubber adhesive which is required as attaching the left grip to the handlebar. *Please be sure to check the "Grip Warmer Application Chart by bike" as some bikes cannot be fitted with the Grip Warmer depending on the year and specifications even if the bike is indicated. *There may be changes in product specifications due to the manufacturer's reasons.
For winter comfort and easy grip! It has been designed exclusively for YAMAHA vehicles for smart installation without modifying the vehicle's wiring.
[Product Description] ・Specially designed for YAMAHA vehicles for smart installation without modifying the vehicle's wiring ・Integrated tubular throttle structure provides the same grip thickness as stock grips and it is the world's smallest diameter grip with heater function *According to the manufacturer ・By using the stainless heating elemet ensuring even heating, it holds high durability. ・The output setting is a simple 3-way push-button system (Hi, Mid, Lo) (Each output level can be set arbitrarily in 10% increments) ・Automatic adjustment of heater output in response to battery voltage. ・Safe design with battery protection.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
Fits: YAMAHA MT-07 -20 * Requires WireLead Sport 3 for installation., YAMAHA MT-07 21- *Wire Lead Sport 2 (Q5K-YSK-001-U48) and 5A mini fuse (5JJ-82151-90) are required for installation., YAMAHA MT-09 17-21 (B6C3)*Wire lead (part number:Q5K-YSK-001-U48) is required for installation., YAMAHA MT-09 17-21 (BS26)* A separate wire lead (part number:Q5K-YSK-001-U48) is required for installation., YAMAHA MT-09 17-21 (BS2F)*Wire lead (part number:Q5K-YSK-001-U48) is required for installation.
[How is it used? I have a BirdCity125ABS with the Handlebar Cover in the winter. Thin gloves are required to ensure maneuverability. The combination of Handlebar Cover and Grip heater (COTA ツ) was reputed to be the best. I installed the Grip heater this time. Was the one you received as per Image? As you can see in the image, it is as thick as a normal Grip and I am very happy with the Large! Was the installation difficult? I was worried that even I, a Custom beginner, would be able to do it. I watched a few installation videos on Youtube and it looked like I could do it, so I did the Challenge! Removing the existing grip was also surprisingly easy. There was nothing difficult about fitting and wiring (just SnapSnap and fit). It looks like a smaller amount of Grip bond would be good. As a result, I was able to install it without any problems! How was your experience with it? It's already too hot for the three levels of high, so I recommend using it on medium or low. [Included Parts:were they on? Harness and Bond need to be prepared separately. [Was there anything that disappointed you? Not just as expected, but more than expected. Other items that would be helpful Watch the installation video on Youtube, it's easy! Harness varies depending on the model and year, so it is better to check beforehand.View Detail
Fits: YAMAHA MT-07 -20 * Requires WireLead Sport 3 for installation., YAMAHA MT-07 21- *Wire Lead Sport 2 (Q5K-YSK-001-U48) and 5A mini fuse (5JJ-82151-90) are required for installation., YAMAHA MT-09 17-21 (B6C3)*Wire lead (part number:Q5K-YSK-001-U48) is required for installation., YAMAHA MT-09 17-21 (BS26)* A separate wire lead (part number:Q5K-YSK-001-U48) is required for installation., YAMAHA MT-09 17-21 (BS2F)*Wire lead (part number:Q5K-YSK-001-U48) is required for installation.
I chose it because I wanted the peace of mind of OEM
The thickness of the Grip is almost the same as that of the NORMAL, and the entire Grip is warm without unevenness in the heat generation area. Rubber grip for wear protection (Heat Shrink Tube) Protected with
With the Handlebar Cover, Winter Gloves are not required when the temperature is around 0°C. The Switch attaches to the Mirror mount so it comes out of the Handlebar Cover.
If you're using a Handlebar Cover that doesn't allow you to easily insert or remove your hand Other Brand Product with integrated Switch and Grip is better.
Wiring processing is troublesome (Or prepare a Connector) If you have any questions, please feel free to contact us. YAMAHA Yamaha Y's GearGrip Heater Wire Lead Big ScooterView Detail
Fits: YAMAHA MT-07 -20 * Requires WireLead Sport 3 for installation., YAMAHA MT-07 21- *Wire Lead Sport 2 (Q5K-YSK-001-U48) and 5A mini fuse (5JJ-82151-90) are required for installation., YAMAHA MT-09 17-21 (B6C3)*Wire lead (part number:Q5K-YSK-001-U48) is required for installation., YAMAHA MT-09 17-21 (BS26)* A separate wire lead (part number:Q5K-YSK-001-U48) is required for installation., YAMAHA MT-09 17-21 (BS2F)*Wire lead (part number:Q5K-YSK-001-U48) is required for installation.
I attached it to Bird Steey 125. Installation was also easy, I completed in about an hour. Temperature is also hot in MAX, this, November. It's pleasure in midwinter performance. View Detail
* The BEST and MUST store to find Japanese parts. * Register now for amazing deals and other special offers! *Over 800,000 listed items. It's hard NOT to find your parts.
SIGN IN TO WEBIKE JAPAN
Please enter email at least 6 characters.
Please enter a valid email address.
Email is already in use.
Your account has been banned.
Email address and/or password is not match.
Authentication with facebook fail.Please try again.
Please select How did you get to know about Webike Japan?
OR
YOUR ACCOUNT HAS BEEN CREATED!
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.
Get on your grid by register your motorcycle! About our "Mybike" service
"Easier to Search Items" It helps you to search items to fit for your motorcycle!
"Get Much Valuable Information" It helps you to get special deals, newly listed items and closeouts about your motorcycle!
"Easy to Register" It requires only your motorcycle manufacturer, model name and model year!