- Fits:
- YAMAHA FZ8 10-
It was decided to get a smaller and more functional eliminator and one we went for was the R&G branded one. I have recently used many of these kits for various bikes from R&G. I found the part by coin...Read More - Fits:
- KAWASAKI NINJA 650 17-18 EX650 KHF/KHFA/KJF/KJFA (69) Accessories (Single Seat Cover) model_code:KHF as_required:1
- KAWASAKI NINJA 650 17-18 EX650 KHF/KHFA/KJF/KJFA (69) Accessories (Single Seat Cover) model_code:KHFA as_required:1
- KAWASAKI NINJA 650 17-18 EX650 KHF/KHFA/KJF/KJFA (69) Accessories (Single Seat Cover) model_code:KJF as_required:1
- KAWASAKI NINJA 650 17-18 EX650 KHF/KHFA/KJF/KJFA (69) Accessories (Single Seat Cover) model_code:KJFA as_required:1
- KAWASAKI NINJA 650 19 EX650 KKF/KKFA (66) Accessories (Single Seat Cover) model_code:KKF as_required:1
- ...and more.
One of the final parts needed which we did not have was this damper for the rear. For some reason this was also missing from the box so I decided to just order a new one instead of trying to hunt down...Read More - Fits:
- HONDA CRF250L 16 AC CAM CHAIN / TENSIONER
- HONDA CRF250L 15 AC CAM CHAIN / TENSIONER
- HONDA CRF250L 14 AC CAM CHAIN / TENSIONER
- HONDA CRF250L 13 AC CAM CHAIN / TENSIONER
- HONDA CBR250R 13 AC CAM CHAIN / TENSIONER
- ...and more.
This bike came in with a cam chain issue and it was diagnosed to be the fault with the cam chain tensioner. The cam chain tensioner was another of the parts I wanted to change on the refresh CRF250 an...Read More - Fits:
- HONDA CBR 1000 RR FIREBLADE SP 14-16 SC59
- HONDA CBR 1000 RR FIREBLADE SP ABS 14-16 SC59
- HONDA CBR 1000 RR FIREBLADE ABS 09-16 SC59
- HONDA CBR 1000 RR FIREBLADE 08-16 SC59
This little baby, the CBR1000RR needed a new air filter and we decided that going OEM was the best option. Not a big job but still, over time these do deteriorate and replacement is essential. Finding...Read More - Fits:
- YAMAHA FZR600AC 90 Swing Arm
- YAMAHA FZR600RA 90 Swing Arm
- YAMAHA FZR600RAC 90 Swing Arm
- YAMAHA FZR600RB 91 Swing Arm
- YAMAHA FZR600RBC 91 Swing Arm
- ...and more.
Whilst I was fixing the faulty bearing on the rear wheel and replacing the oil seal there, I came across another issue with the rear linkage and it's bearings and seals. No point in trying to put a ba...Read More - Fits:
- HONDA S-wing FES1507 07 S-wing FES1507
- HONDA S-wing FES1257 07 S-wing FES1257
- HONDA S-wing ABS FES150A7 07 S-wing ABS FES150A7
- HONDA S-wing ABS FES125A7 07 S-wing ABS FES125A7
This is a brake pad set for a bike that came in. For this reason, as this has already had many pad changes, the customer wanted to keep it standard and stay with the OEM set up for both front and rear...Read More - Fits:
- YAMAHA YZFR1S (YZFR1SJGY) 18 Electrical 2
- YAMAHA YZFR1S (YZFR1SJCGY) 18 Electrical 2
- YAMAHA YZFR1S (YZFR1SHGY) 17 Electrical 2
- YAMAHA YZFR1S (YZFR1SHCGY) 17 Electrical 2
- YAMAHA YZFR1S (YZFR1SGW) 16 Electrical 2
- ...and more.
The bike was a previous track bike and therefore had a little damage here and there. One of the brackets that was really bugging me was this bracket 5 which had a few mount points snapped off. It hold...Read More - Fits:
- YAMAHA FJ09 17 FJ09HCL Steering
- YAMAHA FJ09 17 FJ09HCW Steering
- YAMAHA FJ09 17 FJ09HL Steering
- YAMAHA FJ09 17 FJ09HW Steering
- YAMAHA FZ09 (FZ09ECGY) 14 Steering
- ...and more.
This bike had a lot of problems after a collision and a lot of parts needed changing as they were beyond any sort of repair. This top yoke was one of the major ones that had a pretty bad warp in it. I...Read More - Fits:
- HONDA DAX125
- HONDA CT110 HUNTER CUB 20-21 (CT125) [part used]Front
- HONDA MONKEY125 19-22 [Where used]Front
- HONDA MONKEY125 19-22 ABS [part used] Front
- HONDA GROM 13-21 [Where used]Front
- ...and more.
I have been using Brembo on all my bikes and I also recommend to others. This set are for the Honda Grom 125 2018 front but also fit other Honda models. Super easy to find which pads you need for your...Read More - Fits:
- KAWASAKI VERSYS 11-14 KLE650 CBF/CCF/CDF/CEF (C-8) Oil Pan model_code:CBF as_required:1
- KAWASAKI ER-6N 09-11 ER650 C9F/CAF/CBF (C-8) Oil Pan model_code:C9F as_required:1
- KAWASAKI VERSYS 11-14 KLE650 CBF/CCF/CDF/CEF (C-8) Oil Pan model_code:CCF as_required:1
- KAWASAKI ER-6N 09-10 ER650 C9F/CAF (C-8) Oil Pan model_code:C9F as_required:1
- KAWASAKI ER-6N 09-10 ER650 C9F/CAF (C-8) Oil Pan model_code:CAF as_required:1
- ...and more.
This little gem came in for a couple of bits that needed addressing. Mainly the oil pan gasket had a small leak which was due for a change. Finding the right gasket was not hard as I just used the too...Read More - Fits:
- KAWASAKI Z125 PRO 16-21 [Number of genuine links] 100
- KAWASAKI KSR110 02-08|13 [number of genuine links]100
- KAWASAKI KSR PRO 14 [Number of genuine links]100
- SUZUKI BIRDIE50 83-12 (4 cycle) [Number of genuine links] 98
- SUZUKI BIRDIE50 (FR50) [Number of genuine links] 104
- ...and more.
It was the time to change out the chain and sprockets for my kids Grom. I decided I would go for a 420V as it is a great chain and pretty cheap, I have gone with either the chrome or silver finish pre...Read More - I had an issue with the ignition barrel and snapped the key in the process. After a lot of pushing and pulling the key decided to snap, my bad. So I did not have to go and buy a totally new set of loc...Read More
- Fits:
- YAMAHA YZ450FX 450 - All (2017)
- YAMAHA YZ450FX 450 - All (2016)
- YAMAHA YZ450F 450 - All (2017)
- YAMAHA YZ450F 450 - All (2016)
- YAMAHA YZ450F 450 - All (2015)
- ...and more.
This MT125 came in for a service which included air filter, oil filter and oil change. I decided to go for the K&N filter over the OEM one because you also have the ability to wash, re-oil and re-use ...Read More - Fits:
- HONDA CR93 62 [displacement]125 [number of units required]2
- KAWASAKI GPZ250R 85- EX250E [Engine displacement]250 [Required units]2
- SUZUKI GSX400R 84-86 TSCC specification 84-86.3 [displacement]400 [number of units required]4
- SUZUKI GSX400FW 84-86 TSCC specification 84-86.3 [displacement]400 [number of units required]4
- SUZUKI GF250 85- GJ71A/B [displacement]250 [number of units required]4
- ...and more.
There were a few parts I needed for projects and maintenance, these spark plugs were definitely one of those I was in need of as I had run out of them. I do like to have a few different plugs in stoc...Read More - Fits:
- KAWASAKI Z900(ABS) 17-18
Air filter change on this Z900. Not a big job but still, even though this is only the first filter change, they wanted an aftermarket one to try. Finding the correct filter for the bike was easy too, ...Read More - Fits:
- YAMAHA YZF-R7 22
- YAMAHA XSR700 16-20
- YAMAHA TENERE700 19-21
- YAMAHA MT-07 14-21
This little baby, the YZF-R7 needed a new air filter and we decided that going DNA was the best option for them to try. Not a big job but still, even though this is basically new bike, they wanted an ...Read More - Fits:
- YAMAHA MT-09 17-21 FZ-09
- YAMAHA MT-09 16
- YAMAHA MT-09 16 Street Rally
- YAMAHA MT-09 16 Sport Tracker
- YAMAHA MT-09 16 FZ-09
- ...and more.
I needed some protection for this bike and R&G was my first thought. Webike do stock a lot of R&G products for various models and manufacturers. I found the correct part by cross referencing R&G websi...Read More - Fits:
- YAMAHA C3 (XF50AW) 11 Starter
- YAMAHA C3 (XF50W) 07 Starter
- YAMAHA C3 (XF50XL) 08 Starter
- YAMAHA C3 (XF50XR) 08 Starter
- YAMAHA C3 (XF50XW) 08 Starter
- ...and more.
This was one of the other parts I needed for the Zuma that came in. One of the bushes had become a little too oval for my liking and was no helping the kick start. Not an issue as these parts are avai...Read More - Fits:
- YAMAHA ZUMA II (CW50J) 97 Crankcase
- YAMAHA ZUMA II (CW50J) 97 Starter
- YAMAHA ZUMA II (CW50K) 98 Crankcase
- YAMAHA ZUMA II (CW50K) 98 Starter
- YAMAHA ZUMA II (CW50L) 99 Crankcase
- ...and more.
After having to remove the crankcase cover on this bike, one of the shaft pins decided it was not going to play nicely and snapped off. Only one way to fix this and that was to buy a brand new shaft p...Read More - Fits:
- Vespa GTS150 23
- YAMAHA TRACER 9 GT 23-24
- YAMAHA TRACER 9 23-24
One of my customers recently purchased a new MT09 Tracer GT and wanted to try a different screen. I did refer to the Puig screens which do have a great following from MT09 owners. I have previously pu...Read More
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING