28.56 SGD
(3,200 JPY)
22.69 SGD
(2,547 JPY)
(21% OFF)
4 (4 Reviews)
Very Good
It takes a lot of effort, but the quality is goodI bought this for the Rivet hammering of the Muffler silencer When hitting the thicker one, it is natural, but quite power is needed It hurts, but it's going to be beautiful, so it's okay
Reviews For KIJIMA Hand Riveter From Other Webike User
Excellent
4-2 is used for the size of a blind rivet.
When maintaining a replace silencer, it decomposes, and it is an indispensable tool when assembling.
Or it is an indispensable tool also when making a silencer emblem.
On the frame of the lower part of4-2 is used for the size of a blind rivet.
When maintaining a replace silencer, it decomposes, and it is an indispensable tool when assembling.
Or it is an indispensable tool also when making a silencer emblem.
On the frame of the lower part of the top bridge of W650 and W400, the abbreviation phi3.5mm hole is open beforehand.
They are two abbreviation phi3.5mm about 80 mm-pitch holes to right-hand side.
They are two abbreviation phi3.5mm about 80 mm-pitch holes to left-hand side.
TSU in which rivet conclusion is made there as for the kawasaki pure emblem of a picture!! In this part,
I can think only the hole for attaching a kawasaki pure emblem!! It is a hole of such four right and left!! Since this kawasaki pure emblem is stuck on many of ZRX1200 or reimport vehicles, it is not novel parts.
.
.
If it is stuck on W650, it can acquire a fresh impression!! Incidentally the part number of these kawasaki brand-name parts is #56038-1054.
(A blind rivet can be obtained also for DIY Schopp or a kawasaki original manufacturer's product.) When carrying out plug exchange of W650, how is such customization in passing? It does not take the attachment time of an emblem with 2 minutes by an emblem on either side.
.
.
We are the products most found useful in kijima products.
This hand riveter ? is a good tool though cheap.
The above was introduction of the first team tool which we own.
(^O^)vView Detail
Most Viewed Reviews Of KIJIMA Other Motorcycle Specialized Tools
Excellent
No spare Suction CupAs pointed out in other reviews, LargeSmallQuantity on the Right Side of the photo:There is no spare Suction Cup for 5pcs. each. Suction Cup at both ends with stick (LargeSmall1 each) and Medium Eyes, and Quantity of Fine Compound:Set. I have no problem with this because I was convinced to buy it.
I used it to match the new Valve on my VIRAGO250, the Large one is for the Intake Valve and the Small one is for the Exhaust Valve.:Set was really helpful.
Well, this kind ofQuantity:I think those who buy Set do not need a lot of spare parts.View Detail
Very Good
Easy to useThe grips are easy to hold, so they are strong and easy to work with.
I use it to install and remove the Exhaust Spring and it prevents me from accidentally scratching the exhaust pipe.View Detail
Very Good
If you don't want to damage your Exhaust System, buy it!When replacing the Tandem Footpeg, I was told that the Exhaust System needed to be removed, but in the end I was able to replace it without removing it.
The spring is quite hard, so without a special tool, it looks like I might damage the exhaust system when I pull it with pliers, but with this, it was easy to remove.
I would rather keep it in my toolbox than scratch it and receive a Shock, but I think it will come in handy down the road.View Detail
Other Reviews From Japan User(translated)
Excellent
Radipon handled in Mild?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
Very Good
packtalk bold Attached MountI purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Excellent
Grip replacementGrip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
Very Good
Works well in everyday life[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING