The Instruction Manual states that it is compatible with the STD Handlebar, and since Sash's car, the Kelkus, uses the OEM Option Parts, Tapper Handlebar, I asked him to install it after replacing it with the OEM STD Handlebar. It was a great experience.
The quality is high, there is no dirt, scratches, BALI, etc., and the transparency of ShieldScreen is also satisfactory.
I would have been more than happy to include a mounting bracket that would also fit the Tapper Handlebar.
After the installation is completed, the front end of the car is slightly heavier and the stability of the car is better.
If you are trying to get a light feeling in NORMAL, I think you will need to Reset the suspension.
Windproofing, from the time of NORMAL, reduced by half. The attack is also reduced, and the fatigue of the rider is also reduced. The comfort has been improved. Recommendation for touring riders who want comfort.
On the other hand, I think that the rider who runs off-road aggressively feels that the agility and the feeling of lightness by the weight are lowered, so Recommendation is Stripe Sen.
Fits: HONDA CRF300L 21-22, HONDA CRF250M 12-22, HONDA CRF250L(S) 21-22, HONDA CRF250L 12-22
This was mounted on a 300L. Nice quality, fits well. Lots of turbulence for me at my height at 71".Mounted right side up was worse. When mounted upside down it lowers the turbulence to around my neck and chin. Tilting of the shield made no difference for me. Lowering adjustment is limited because the right bar of the frame hits your brake cable. View Detail
Fits: HONDA CRF300L 21-22, HONDA CRF250M 12-22, HONDA CRF250L(S) 21-22, HONDA CRF250L 12-22
Screen on CRF250L? I thought. (Lol)
I put a carrier on it, loaded it with boxes, put a hand guard on it, and …oh my gosh? It turns into an Adventure Motorcycle! Then it might be a better parenthesis with Screen!
It may not be suitable for those who enjoy a stiff off-road…
The wind and rain protection is only a relief.View Detail
Fits: HONDA CRF300L 21-22, HONDA CRF250M 12-22, HONDA CRF250L(S) 21-22, HONDA CRF250L 12-22
I installed it on my CRF250L Initial Model, and I also installed ETC so that I can drive on highways, but it is quite heavy, so I think it is not suitable for use mainly when the car is off. However, the installation pipe is firm, so it is safe.View Detail
Fits: HONDA CRF300L 21-22, HONDA CRF250M 12-22, HONDA CRF250L(S) 21-22, HONDA CRF250L 12-22
It is for CRF250, but the size around Handlebar Clamp was the same, so it was possible to divert to the same HONDA vehicle.
My concern was the interference of Clutch and Choke Cable.
After all, it seemed that Cable was overpowered in the position as it was, so it was necessary to adjust Route.
The feel of it.
The wind protection effect while driving is very high.
It can be used as a Mount bar for Mobile.
Navigation or a smartphone can be mounted near the top of the Meter.
Refreshing around the Handlebar and
It is also safe because the movement of the eye becomes Small.
About the look.
The way it looks from the Riding position is very cool.
It doesn't match the body of the car when viewed from the side, so it's not very good.
I can't complain as this is due to it being a retrofit for another model.View Detail
Fits: HONDA CRF300L 21-22, HONDA CRF250M 12-22, HONDA CRF250L(S) 21-22, HONDA CRF250L 12-22
Mounting
Installation itself is extremely easy and takes less than 30 minutes.
The stability after installation is excellent.
Just the Attachment feet that attach in exchange for the OEM HandlebarHolder The handlebar can be fixed, but it can't be fixed to the holder on the car body side. I feel like I need a Spacer.
Impressions
It is installed at a slightly higher angle than the angle of the light cowl.
This is where the wind hits the top of the Helmet at 100km/h.
ScreenThe wind from the side does not hit your body and is comfortable.
On the contrary, the wind that comes up through the gap in the Shroud and hits your body is about to bother you.
Even at 110km/h, the impression is the same. Beyond that, the Engine. It's all right. I haven't tried it.
On the other hand, the wind will be blowing around 70-80km/h, and the wind will be blowing around the side of the Screen.
I'd like to see another 3 to 4 cm wide.
Anyway, I think the effect is good enough because I suddenly noticed that the speed is more than before the installation.View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING