Once you select the option, estimate delivery time will be displayed.
*Shipping date and Estimate time of arrival are not guarantee.
Once your orders are placed, we will check the stock of manufacturer and send you the confirmed Shipping time via e-mail.
[Material] Duralumin A2017 material [Color] Handlebar: Black [Surface treatment] Stem nut: hard anodizing [Handlebar position] 4 positions: Street Hi (stock) *CAFE only supports one position
[Opening angle / Height] Free [Handlebar locks] Available [Handlebar stopper function] Available
[bearings] ・Under bracket side: Accessory ・Top bridge side: Stock to be reused
[Specification] ・Compatible with stock brake master ・Compatible with stock clutch holder ・Confirmed Brembo RCS brakes ・Stock light bracket, meter, horn, etc. can be used
[Components] ・Special meter brackets ・Exclusive collar set
*Brake / Clutch* ・Depending on the position, the oil tank and clutch wire may interfere with the meter cover. ・The brake hose needs to be changed to an aftermarket one or the routing needs to be changed.
*Wires* ・The accelerator wire, clutch wire, and switch cables need to be changed.
*Position Details* ・When installing the fork clamps, the clamp bolts should face outward with the handlebar clamp attachment pointing upward. ・The handlebar clamps face +5 degrees in the straddled position. ・Other positions cannot be installed as they will interfere with the stock blinkers. *The direction of the vehicle is determined by riding on the vehicle.
*Compatible part numbers are different for Z900RS and Z900RS CAFE, so please check and purchase beforehand.
*This kit is specially designed for Z900RS CAFE with additional parts required for installation.For Z900RS without cowl, please purchase another part number. *Z900RS CAFE has a limitation on the position to avoid interference with the stock blinkers.Please read the following notes before purchasing. *Only Street Hi (stock) position is compatible. ・Since the master cylinder is close to the blinker, the installation angle of the master cylinder is limited.Adjust it so that it does not touch the blinker.(See image) ・In order to prevent interference with the cowl, the cowl, meter and light will be offset to the front.(See image) ・When installing the rearview mirror, it is required to remove the mirror clamps.Please note that the mirror cannot be replaced if it is fixed to the handlebar.Depending on the type of mirror, it may not be able to be installed due to interference with the cowl. *The light bracket, meter, horn, etc. can be used with the stock products. *Hole drilling to the handlebar is required to fix the switch box. *Use the stock clamp bolts for the under bracket. *Bar ends are not included and must be purchased separately. *Installation requires specialized knowledge and tools, so please contact a professional shop for installation. *The mounting mirror in the image is ZII type short bracket. *Images may contain other products. *The individual images are in color: Brown / Black. *There may be changes in product specifications due to the manufacturer's reasons.
We've been waiting a long time for this. Finally, Striker was able to confirm the installation of the clip on handlebar kit on the Z900RSCAFE.
In the case of Z900RS CAFE, this product could not be install because it interfered with the stock light bracket, but this time, STRIKER has introduced the CAFE at STRIKER and confirmed the installation. By offsetting the stock light bracket to the front, STRIKER was able to eliminate the interference and make it compatible with the installation.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
* The BEST and MUST store to find Japanese parts. * Register now for amazing deals and other special offers! *Over 800,000 listed items. It's hard NOT to find your parts.
SIGN IN TO WEBIKE JAPAN
Please enter email at least 6 characters.
Please enter a valid email address.
Email is already in use.
Your account has been banned.
Email address and/or password is not match.
Authentication with facebook fail.Please try again.
Please select How did you get to know about Webike Japan?
OR
YOUR ACCOUNT HAS BEEN CREATED!
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.
Get on your grid by register your motorcycle! About our "Mybike" service
"Easier to Search Items" It helps you to search items to fit for your motorcycle!
"Get Much Valuable Information" It helps you to get special deals, newly listed items and closeouts about your motorcycle!
"Easy to Register" It requires only your motorcycle manufacturer, model name and model year!