Color: Black Material: made of aluminum Fork bracket thickness: 28mm Handlebar: Outer diameter Φ22.2mm, Length: 230mm
[Specification] ・25mm lower than stock ・Offset 20mm forward from stock ・Handle hanging angle: Infinitely adjustable ・Handle opening angle: Infinitely adjustable
[Regarding installation] *Please be sure to ask a qualified and skilled person such as a mechanic to install the product. *The handlebar is screwed into the handlebar bracket, so please use threadlocker before installation to prevent the handlebar from loosening. *The handlebar does not have a hole for the switch housing, so drilling is required. *Front forks must be installed with 6mm protrusion. *Pay attention to the routing of the brake hose and the angle of cut. *The brake hose is routed outside the top bridge clamp to allow more room for the brake hose after installation. *Install with care to avoid interference with the tank and cowl.
*There may be changes in product specifications due to the manufacturer's reasons.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
[How is it used? WindingMain's Touring~Circuit driving event
Was the installation difficult? It's not too difficult, but it's around Handlebar, so basic tools are required. It is necessary to process the hole drilling for Switch box.
How was your experience with it? Unlike other manufacturers, the opening angle and aperture angle can be adjusted steplessly, so you can pay attention to the fine position adjustment. The Handlebar itself is stiff and seems to be of high quality.
[Position] I use it farther and lower than OEM, slightly more open and with a stronger aperture. It is easy to handle the upper body when cornering, and it is fun to strengthen the sense of human-horse unity. This position is not suitable for street riding or casual touring.
[Notes] In the case of the Ninja 400, there is a bracket under the top bridge that holds the brake hose and other cables. On the Ninja 400, there is a bracket under the top bridge that holds the brake hose and other cables. In order to prevent interference with the cowl, a handlebar stopper has been added to limit the cutting angle. If you don't want to do this adjustment or it's too much trouble for you, you can choose the Type which can be ponched by other manufacturers.View Detail
* The BEST and MUST store to find Japanese parts. * Register now for amazing deals and other special offers! *Over 800,000 listed items. It's hard NOT to find your parts.
SIGN IN TO WEBIKE JAPAN
Please enter email at least 6 characters.
Please enter a valid email address.
Email is already in use.
Your account has been banned.
Email address and/or password is not match.
Authentication with facebook fail.Please try again.
Please select How did you get to know about Webike Japan?
OR
YOUR ACCOUNT HAS BEEN CREATED!
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.
Get on your grid by register your motorcycle! About our "Mybike" service
"Easier to Search Items" It helps you to search items to fit for your motorcycle!
"Get Much Valuable Information" It helps you to get special deals, newly listed items and closeouts about your motorcycle!
"Easy to Register" It requires only your motorcycle manufacturer, model name and model year!