*This product is a set of "Mesh Cushion" and "Gel Cushion" for motorcycle. *This product may not fit off-road motorcycles with narrow seats that are designed to be seated backwards. *It may be difficult to install in some vehicles due to the increase in the number of fixing belts under the seat.Adjust the position of the fixing belt to fit. *The colors of the products may vary slightly depending on your monitor and settings. *Design and specifications are subject to change without notice for product improvement. *Size and weight figures may vary slightly. *Compatibility and suitability between this product and other DOPPELGANGER products may or may not exist.Be sure to check the size and specifications of each product before purchasing. *The appearance and specifications of the product are subject to change without notice during development or for improvement.Therefore, it may differ from the actual product. *Do not use at speeds above the legal limit. *It may not be able to be fixed properly depending on the shape of the vehicle body.Please check the product dimensions after purchasing. *Color migration may occur if the product is in contact with other materials for a long time in a high temperature and high humidity environment. *This product is not guaranteed to reduce pain or fatigue. *The installation of this product will increase the seat height of the seat and change the footing. *There may be changes in product specifications due to the manufacturer's reasons.
This feeling is irreplaceable.Declaring all seasons a good ass!Gel and mesh motorcycle seat cushion set.
"Even motorcyclists have sore butts!"Pain in the buttocks caused by sitting in a seat for a long time. In summer, the radiant heat from the engine makes your buttocks uncomfortable. The fun touring will become a hard training. The concept of this product is "to remove unnecessary riding stress". The set includes a shock-absorbing gel cushion and two 3D mesh cushions that can be used separately or set up together. Spring, summer, autumn and winter, to support the condition of the buttocks of motorcycle riders, is a set of seat cushion dedicated to motorcycle touring.
[I can't take it anymore.This pain in the butt.] The pain in the buttocks becomes gradually painful after long hours of touring. If a motorcyclist begins to swing his or her hips from side to side while driving, it is a sign of pain. The gel cushion is made of shock-absorbing gel to disperse the seat pressure when riding. The less pain in the buttocks, the more fun touring will be.
■Shock absorbing gel Built-in 10mm thick shock-absorbing gel. It not only disperses the seat pressure but also absorbs the vibration from the seat.
■Distributes seat pressure It reduces the pain by dispersing the sitting pressure which is concentrated at the tip of the sciatic bone to a wider area.
■Non-slip EVA to reduce slippage EVA material that transmits the pressure from the buttocks to the gel and PU inner cushion to the seat of the bike.
[I can't take it anymore.This butt steaming.] Long touring time, the underwear sticks to the buttocks steamy. In the summer, the hot air from the engine also adds to the discomfort index. The mesh cushion is made of 3D mesh material, which is a combination of highly breathable 3D cushion and honeycomb net. By keeping your buttocks dry, you can reduce the stress of riding.
■Forced ventilation with 3D mesh Adopted 3D mesh with high resilience and breathability to return to its original state even if crushed. The hot air in the inseam is discharged by the running wind.
■Non-slip mesh to reduce slippage The bottom of the seat, which is in close contact with the bike seat, is a mesh seat that keeps the seat cushion from shifting while ensuring air permeability.
[Sore and steaming.For overlapping pains, two layers.] Spring and summer touring season when the mileage of motorcycles also increases.The temperature is high and you feel fine, but the more time you spend riding, the more pain and steam you feel. As the name suggests, the seat cushion set for motorcycles "Cool & Gel" can be set up with two layers of cushions that can be used individually. It can be used according to the situation of the day.
■Guide loops for two-ply stacking Guide loops for layering the 3D mesh cushion and gel cushion are standard equipment.
■Size design for two-piece layering In order to reduce the thickness of the edge, the 3D mesh cushion is designed to be smaller than the gel cushion.
[Easy installation, even on wide seats.] Designed to easily fit both sport bike seats and tourer seats that are thicker and wider. This is a seat customization that you can do easily by yourself.
■Just wrap it around the seat to install Simply connect the hook and loop fasteners on the fixing belt. You can also connect the belt at an angle to avoid the latch.
■Cutting that considers the footing The footing will change even slightly depending on the installation. The side is cut to make it easy to put your foot out when you stop the vehicle.
■Extension belt included Comes with two extension belts that can be extended by 5cm if the length of the fixing belt is not enough.
[Product Features] ■Shock absorbing gel Shock-absorbing gel that disperses seat pressure and absorbs vibration from the seat to relieve pain in the buttocks.
■Non-slip EVA EVA material to transmit pressure to the seat of the bike.(Adopted on the back of the gel cushion.)
■3D Mesh Three-dimensional cushioning and honeycomb netting ensure high resilience and breathability.
■Non-slip mesh Mesh sheet to prevent slippage while ensuring air permeability.(Adopted on the back of the mesh cushion.)
■Guide loops for two-ply stacking Guide loop for layering 3D mesh cushion and gel cushion.
■Extension belt for wide seat included Comes with two extension belts that can be extended by 5cm.
[How to use] ■How to wear the 3D mesh / gel cushion together 1. Layer 3D mesh and gel Place the gel cushion and 3D mesh cushion on the removed seat.
2. Thread the fixing belt of the 3D Mesh Cushion through the guide loop for stacking two cushions Pass the fixing belt of the 3D Mesh Cushion through the four guide loops for two layers.
3. Connect the fixing belt at the back of the seat Connect the fixation belt so that the hook and loop fasteners overlap by at least 5cm.
4. Fix the seat to the bike Fit the seat to the bike, adjusting the fixing belt so that it does not get caught in the latch.
■How to install the seat by itself 1. Put a cushion on the bike seat Put the cushion on the removed seat.
2. Connect the fixing belt at the back of the seat Connect the fixation belt so that the hook and loop fasteners overlap by at least 5cm.If the length is insufficient, please use the attached extension belt.
3. Fix the seat to the bike Fit the seat to the bike, adjusting the fixing belt so that it does not get caught in the latch.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
Recently viewed products
Ratings & reviews for this product or related products
SkyWave (burgman) I used it on my 650LX and extended the Elastic band, but after about 3 months of use, the seat became too high and I couldn't get my footing, so I took it off. It's not uncomfortable, but it's not something you want to sacrifice your leg room for.View Detail
As others have written, the pain in your butt isn't gone, but it's a little easier? Maybe? Personally, I feel it's like wearing it for Seat height adjustment. The other problem is that the buttocks are slippery. I'm going to hope that it will stop slipping.View Detail
I bought these because even though they are usually easier to run on the harder ones, they are getting harder to run over long distances.
important item [Was there anything that disappointed you? No dramatic changes. Do you have any wishes or improvements you would like to make for the Manufacturer? I'd like to buy a product with different thickness depending on the area. [Do you have any products to compare it to? None
Frequently Asked Items What made you decide to buy? Meshes can be detachable. How was your experience with it? The same position for a long time makes the Gel biased and the MeshMaterial slippery. Was the installation difficult? No 【Please tell me the installation point and hang】 Belt is stretched tight and fastened to the Velcro [Was the Instruction Manual easy to understand? No View Detail
Honda400X (2016) User. After riding 5 times with GelSeat and Honeycomb mesh for a total of about 350km, I felt uncomfortable because of the pressure on one part of my buttocks due to the unevenness of the Gel. The result is that the pressure is more dispersed when it's not there, which reaffirms how well the 400X Seat is doing.View Detail
The Seat of GSXS750 is Small swinging, and touring up to 300km is not a good idea for the butt. The pain is bearable, but touring over 300km will cause your butt to hurt and you'll have to take a lot of breaks. As a countermeasure against pain in the buttocks, we have installed GelSeat and Mesh seat, but none of them have been able to provide a good solution. It does not have much effect. Finally, I bought Pants with Urethane pad, but it was no good because my buttocks got steamed. I was looking at motorcycles on the Net one day when I saw this motorcycle seat. One day I was looking at motorcycle gear on the net and found this Seat for motorcycles. The cushionCool & Gel caught my eye and the GelSeat and Mesh seat Quantity:I bought it because it was 1 Set of 2pcs. and the price was reasonable. I received the product and immediately installed it, but GelSeat put the Mesh seat on it first. It installed without any problems. Also, the strap for the mesh seat has a hole to pass through the GelSeat underneath, and it was neatly organized. I'm looking forward to seeing if the Mesh seat will prevent steam and GelSeat will relieve my bum pain in the summer.View Detail
* The BEST and MUST store to find Japanese parts. * Register now for amazing deals and other special offers! *Over 800,000 listed items. It's hard NOT to find your parts.
SIGN IN TO WEBIKE JAPAN
Please enter email at least 6 characters.
Please enter a valid email address.
Email is already in use.
Your account has been banned.
Email address and/or password is not match.
Authentication with facebook fail.Please try again.
Please select How did you get to know about Webike Japan?
OR
YOUR ACCOUNT HAS BEEN CREATED!
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.
Get on your grid by register your motorcycle! About our "Mybike" service
"Easier to Search Items" It helps you to search items to fit for your motorcycle!
"Get Much Valuable Information" It helps you to get special deals, newly listed items and closeouts about your motorcycle!
"Easy to Register" It requires only your motorcycle manufacturer, model name and model year!