Once you select the option, estimate delivery time will be displayed.
*Shipping date and Estimate time of arrival are not guarantee.
Once your orders are placed, we will check the stock of manufacturer and send you the confirmed Shipping time via e-mail.
[Product Description] LOFON wireless charging pad (with USB type A connector cord) ・Strong double-sided tape
[Specification] ・Input: 9V 1.67A,QC2.0,QC3.0 ・Output: 7.5W/10W Pad dimensions:Width 5.5cm X Length 8.5cm X Thickness 0.4cm USB connector type:USB type A Pad surface finish:Non slip finish Tested for IP67 waterproof and dustproof
[manufacturer's part number] Length of the connector cord 50 cm:LOF-108D Length of the connector cord 100 cm:LOF-108B
*Wireless charging requires your smartphone to support Qi (Qi).For fast charging, a QC2.0 or 3.0 compatible smartphone and power supply (battery, AC adapter, etc.) are required. Please make sure that your device is compatible with it. *Qi receiver is not included. *Power supply is not included. *AC adapters with USB ports are available from various manufacturers.You can use fast charging by selecting a QC (quick charge) compatible power supply.If fast charging is not supported, it will charge at normal speed. *For fast charging, you need to have a QC compatible smartphone.Please check with the telecommunication company or the manufacturer of the smartphone you purchased for the compatibility status. *Thickness of the smartphone cover may interfere with wireless charging.In that case, please remove the cover and use it. *The included double-sided tape is very strong, so it is difficult to return to the original state once it is applied.Please consider the mounting surface carefully.It cannot be applied to the surface which is rough or oily.Please wipe off the dirt and consider a flat surface for the application. *It may be difficult to install this product depending on the shape of the stand to which it is attached.Please check the pad dimensions of this product before opening the package. *Please make sure your device supports QC charging.If you use it with a device that does not support Qi, please attach a wireless conversion case, Qi charging receiver, etc. and use it. *When charging, please use QC2.0 compatible adapter, if you need fast charging, please use QC2.0/3.0 adapter. *Please do not use this product with a metal phone ring attached to the back, as it may cause problems such as the metal part getting hot. *Because of the characteristics of the mobile phone charging system, a temperature range of 0°C to 50°C is required for efficient charging.In other temperature environments, the charging efficiency may be reduced. *If you experience any problems such as not being able to charge your phone while using it, please try charging it with the phone case removed. *Please note that there may be changes to the product specifications without notice. *This software may not work properly due to OS version upgrade or equipment specification change. *We do not warrant any loss, damage, stain, or corruption of the main body or internal data caused by the use of this product.Please be forewarned.
It is a wireless charging pad for smartphones with dustproof and waterproof performance. It is recommended to install it on a smart phone stand installed on a motorcycle or car. The charging pad can be fixed to various locations with the included double-sided tape. It can be connected to a power supply with a USB connector and can be quickly charged with QC(QuickCharge)2.0 and 3.0. Choose either a 100cm or 50cm connector cord length.
[The surface of the pad has a non-slip finish.] The smartphone is less likely to slip, which further enhances the shock-absorbing power of the stand's hold.
[Double-sided tape is included for easy attachment to any desired location.] After attaching the supplied double-sided tape to the back of the "LOV-ON", you can attach it to the stand or any other place of your choice.
[Waterproof for peace of mind.Passed IP67 standard dust and water resistance test] The IP67 standard tests that temporary immersion in water does not affect the use of the device and that dust does not enter the device. To ensure long life of the product, avoid prolonged exposure to moisture.
[USB type A connection cord for easy charging] The most common USB type A connection cord, which can be connected to a battery or AC adapter to supply power.
Recently viewed products
Ratings & reviews for this product or related products
Reason for purchase Quantity iPhone to Motorcycle's Smartphone Mount:It's a pain in the ass to connect the Lightning Cable every time it's set. The Lightning Cable is prone to breakage and degradation if it is left out in the rain. The fact that the price is not much different from the price of this product was also a deciding factor in my decision to buy a good quality Lightning Cable as a replacement.
Installation It comes with double-sided tape that is very strong and elastic like Sponge, so you can attach it anywhere you want. If you place this product around the center of the back side of the iPhone Body, it will charge nicely, so in the case of the Moto Corse Universal mount (the phone mount part seems to be made by SYGN HOUSE), it's just right to put it on the upper side. Quantity Handlebar:Pair (for Left and Right) The length of the USB cable is also important because it needs to be placed at a position where it will not interfere with the USB cable when it is fully loaded in the
Good points No need to plug in the LightningCable to charge it, which eliminates the hassle. If the vehicle's power supply side (USB power supply) supports QC3.0, it should be able to charge your phone fast. The above high-speed charging allows charging to proceed even while listening to navigation or music. (If your phone does not support fast charging, it may not be able to keep up with the charging, depending on how the phone is being used. I feel that the area of the body is a little wide, but since it is smaller than the body of the smartphone, there is no problem in attaching it to the smartphone mount and there is no problem with its thickness because it is thin at the level where I think it will be damaged if it is any thinner.
What I liked about it Since the USB cable that extends from the body is thin and flat, and the durability seems not to be very high, it is necessary to devise a way not to interfere with the Handlebar when it is cut, and to prevent Cable from taking damage by vibration of the vehicle or flapping by the wind. Needs fixing. While charging, the LED at the base of the USBConnector glows, but the LED is very small and the amount of light is weak, so it's almost impossible to see it during the daytime. Therefore, it is necessary to check the charging status on the phone. It would have been nice to be able to connect directly from the Attachment power supply or Battery.
Summary The Merit is a great way to get rid of the hassle of plugging and unplugging your phone's Cable every time you get on and off a motorcycle. In fact, I can't think of any other part of the Merit in the long run, as the LIGHTNINGCable is much less expensive than its predecessor. The distance between the phone mount and the USB power supply can vary depending on the type of car you're driving, so the 50cm and 100cm versions are available at the same price, which I highly recommend. In my case, the total cost exceeded 6,000 because I separately purchased a QC3.0 compliant USB power supply. If they had a separate product that could be used with a power supply or Battery direct, I would have bought that one.View Detail
It sticks to the X-Grip of the RAM Mount with the attached Double-sided Tape, and iPhone XR is navigated while charging. If you move this product upward from the Center of the Mount, the position of the receiving coil and the iPhone will be just right. Here, the X-Grip won't press the VolumeButton.
We strongly recommend the Charger to be Quick Charge 3.0 compatible. With a QC-uncompliant Charger, if you keep your phone screen on at all times, you'll be able to The power supply and consumption seemed to be about the same, and the battery life hardly increased.
Anker's USBTester measurements for the Car charger2MODEL are as follows ・PowerDrive Speed 2 (QC3 compatible, Power IQ compatible):9V/1.2A → approx. 11w ・PowerDrive 2 (No QC support, Power IQ support):5V/0.8A → about 4wView Detail
It is very convenient because it can be attached to any smartphone holder I was also attracted to the fact that it is waterproof By the way, I am attaching it to my SYGN HOUSE smartphone mountView Detail
* The BEST and MUST store to find Japanese parts. * Register now for amazing deals and other special offers! *Over 800,000 listed items. It's hard NOT to find your parts.
SIGN IN TO WEBIKE JAPAN
Please enter email at least 6 characters.
Please enter a valid email address.
Email is already in use.
Your account has been banned.
Email address and/or password is not match.
Authentication with facebook fail.Please try again.
Please select How did you get to know about Webike Japan?
OR
YOUR ACCOUNT HAS BEEN CREATED!
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.
Get on your grid by register your motorcycle! About our "Mybike" service
"Easier to Search Items" It helps you to search items to fit for your motorcycle!
"Get Much Valuable Information" It helps you to get special deals, newly listed items and closeouts about your motorcycle!
"Easy to Register" It requires only your motorcycle manufacturer, model name and model year!