*After replacing the drive belt, a break-in procedure is required. *Instruction manual is not included. *There may be changes in product specifications due to the manufacturer's reasons.
* The image is only for reference. The image shown may differ from the actual product.
[Product Description] Simplification of the product package and cost control by placing a large order have realized low price and high performance. The slip rate of the drive belt is set in the appropriate range for each type of vehicle, so that the drive belt, which is the life of the drive system of the scooter, can be used with confidence. As a result, gear shifting becomes smoother, and the kickdown effect generated by the torque cam can be transmitted to the drive side pulley without fail. It is made of reliable and durable core wire material and high quality rubber to achieve long life at low cost. For light tuning such as high speed pulleys. This is a high quality drive belt designed and manufactured 100% in Japan, meeting JASO standards for performance, durability and cost performance.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
Quantity in the previous vehicle:2pc, this is the first pc in a newly purchased vehicle. The last two replacements were used for 10,000 km and 13,000 km respectively, and they did not malfunction or break, making them a safe repeat purchase.
As the product description says, it is compatible with High Speed Pulley. Is it a little Long? I am using it on my PCX125 engine in combination with a DAYTONAHigh Speed Pulley and a KITACO Power Drive Kit Type X. I have not had any problems. As the product description says, it is compatible with High Speed Pulley.View Detail
[How is it used? In use. PCX125 (JF28) I replaced the drivetrain on the suspension of the The DriveV Belt that I had originally put on felt like it was slipping somewhat. It had about 5000km on it since I last checked it. When I opened it up, the old one already had a crack in the valley and was already at the end of its life. Was it a little too late?
Was the one you received as per Image? I liked Parenthesis better than Image because it was kind of, well, fibrous. I was under the impression that I received a very good product for the price.
The side angles are totally different when compared to the OEM Drive belt. The angle is much closer to vertical on this product. This product is much closer to vertical angle. I think so.
Was the installation difficult? I thought it needed a little more Power to install than the OEM one. I'm not sure if it's because it's new or not, but I'd suggest doing some preliminary research on youtube on how to do things with Tie Wraps before you go to work on it.
The first time I opened the Crankcase, I had a hard time getting it off. If you are going to do this, please use a T-type Box Wrench before you start. (I think it was 8mm) and Rubber hammer are recommended to be prepared.
How was your experience with it? It has been driven about 100 km. To be honest, I thought it wouldn't change that much even though it was a reinforced V-Type. Immediately after the replacement, it feels like there is no change. But after about 10k miles it started to feel right, and it was clearly quicker and more fun at lower speeds. Maybe it's because it's new, but well, that's it.
[Included Parts:were they on? None
[Was there anything that disappointed you? None! Satisfied!View Detail
I changed it to LEAD125 at 6,000 km It seems to fall off Also, when the vibration of the Engine becomes large during driving, it is time to replace it This is a GRONDEMENTMassimo Belt This is a simple packaged item in Vinyl, so it's a GRONDEMENT Massimo Belt It's cheaper than the Belt The product is the same, so it's a good buy I have used it on various Scooters and it is very accurate Inexpensive belts can increase the engine vibration and break easily It is a very good Belt with no It is recommended It does not include an Instruction Manual, so it is only for those who have knowledge of it It is View Detail
Purchased for the drivetrain Refresh on my commuter vehicle I installed it I wonder if it's made a little longer than the OEM Product, pulled to Top speed I feel that the sense of the drivetrain at the time has decreased Until now, the feeling that the resistance other than Engine Power has been applied with the depression of Belt is But when I replaced it with this Drive belt, the discomfort was gone Often times, mid-custom scooters tend to have a High Speed The lack of belt length due to the inclusion of a Pulley will cause your belt to run out You may be able to avoid such risks by using this slightly longer Belt View Detail
* The BEST and MUST store to find Japanese parts. * Register now for amazing deals and other special offers! *Over 800,000 listed items. It's hard NOT to find your parts.
SIGN IN TO WEBIKE JAPAN
Please enter email at least 6 characters.
Please enter a valid email address.
Email is already in use.
Your account has been banned.
Email address and/or password is not match.
Authentication with facebook fail.Please try again.
Please select How did you get to know about Webike Japan?
OR
YOUR ACCOUNT HAS BEEN CREATED!
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.
Get on your grid by register your motorcycle! About our "Mybike" service
"Easier to Search Items" It helps you to search items to fit for your motorcycle!
"Get Much Valuable Information" It helps you to get special deals, newly listed items and closeouts about your motorcycle!
"Easy to Register" It requires only your motorcycle manufacturer, model name and model year!