■Type1 Front Fork for 10inch
Reinforced upright front forks suitable for high power engine parts.
The Type 1 front fork uses the same free valve type damping force generation mechanism as the larger models to improve stability and reduce shock on rebound.The use of DU metal greatly improves the operability and the structure has high potential for racing use.
For 10" Φ27 upright front forks (type 1)
Fork A Length: 539mm, Outer tube B: 256mm
Fork oil quantity: 75cc, Fork Oil Viscosity: 40mm 2/S
Kit for Monkey Gorilla Bar Handle
In case of Monkey, you need to remove the normal folding handle and purchase the handle pipe separately.Gorilla can be installed with stock handlebars.
The stock front fender can be installed.
■Details of each part
Top bridge/steering stem
Duralumin machined with anodized finish.The back side is lightly punched.With steering lock bracket.
Fork pitch: 174mm
Wheel Mounting Width: 149mm
Disc brake specification
Disc brake specification uses die-cast lightweight wheel hubs and stainless steel disc rotors
Compared to conventional wheel hubs, this wheel hub is about 7% lighter and has a beautiful barrel polished surface.
The disc rotor is made of stainless steel, which is resistant to rust and has excellent durability.
All stainless steel 1 piece type Φ170 disc rotor.
■Parts purchased separately
Headlight bracket for Φ27 upright fork (09-03-007)
Φ27Blinker bracket for upright fork (05-08-0002)
This blinker bracket can be used for both OEM blinkers and SP Takegawa's custom blinkers.
It is necessary to change to SP Takegawa 10 inches wheels or SP Takegawa 12 inch wheels.
SP Takegawa Front Fender must be purchased separately.
In the case of disc brakes, the OEM throttle holder cannot be used because a front master cylinder is installed.The parts to be purchased vary depending on the vehicle and carburetor specifications.
For Monkey/Gorilla (carburetor bike) with stock carburetor: Throttle holder with universal switch
(09-02-0302)For Monkey/Gorilla (carburetor type) with SP Takegawa carburetor: .Standard High Throttle 710mm
(09-02-0222 )/810mm
(09-02-0221 )
For stock throttle bodies on Monkey (injection bike): High throttle (without cable)
(09-02-0223)■To get the wheel center (10 inches wheel use condition)
■About the installation of SP Takegawa's 12-inch wheels
The following φ27 upright front fork kit for 10 inch wheels is also compatible with SP Takegawa's 12 inch wheels.
However, the tires to be used are limited to the MAXXIS 12-inch flat tires sold at SP Takegawa.
When other tire sizes are installed, they may interfere with the outer tube of the front fork.Also, SP Takegawa front fender may interfere with the tire and may not be able to be installed.
How to get the wheel center (under the condition of using 12 inches wheel)