-08 (Carburetor)*Drilling of switch holes is required. |*It is necessary to change the throttle cable, clutch cable and brake hose. |*It is necessary to change the direction of the brake banjo.
GRASS TRACKER Big Boy
09-12 (FI car)*You can use stock side caps.
GRASS TRACKER
-08 (Carburetor)*Drilling of switch holes is required. |*It is necessary to change the throttle cable, clutch cable and brake hose. |*It is necessary to change the direction of the brake banjo.
GRASS TRACKER
09-12 09-12(FI cars)*Side caps can be used with the stock ones.
*Requires drilling of switch hole|*Applicable side cap (for 18mm dia.)|*Cannot be installed on models 05 and later due to interference with the cowl.
ESTRELLARSCustom
96-99 *Processing of switch hole required|* Required side cap (for 18mm ID)
ZRX1200R
*Requires drilling of switch hole| * Requires side cap (for 18mm diameter)
ZRX400
-04 *Processing to drill switch holes is required|* Required side cap (for 18mm I.D.)|*Not available for the models after 05 due to interference with the cowl.
Made in Japan.Prototype, installation confirmation and mass production are all under in-house management.These handlebars are made with a great deal of care and attention to detail, including careful selection of materials, several types of polishing, engraving of part numbers, high-precision bending and welding, and high-quality surface treatment, based on technology and know-how cultivated over many years in Osaka in Japan.STKM13A steel material with excellent tensile strength is used.Triple nickel and chrome plating (3 layers of nickel and chrome) finish with thick film and excellent durability and corrosion resistance.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
Fits: SUZUKI GSR400 -12 *Ask to drill switch holes|* Normal side caps can be used., KAWASAKI BALIUS2 *Requires drilling of switch hole|* Requires side cap (for 18mm diameter), KAWASAKI ZEPHYR750 RS *Requires drilling of switch hole|* Requires side cap (for 18mm diameter), KAWASAKI ZEPHYRX *Requires drilling of switch hole|* Requires side cap (for 18mm diameter), KAWASAKI ZEPHYR750 *Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
[How is it used? I changed XJR400R from OEM Handlebar to this Condor Handle.
Was the one you received as per Image? The precision of the construction is good and the shape is cool.
Was the installation difficult? It was the first time for me to replace the handlebar, so I had to remove and install the switch, fine-tune the angle of the handlebar, etc. The drilling of the holes for the switch box was done by a nearby motorcycle shop.
How was your experience with it? With the OEM Handlebar, it seemed a little far away, but now that the Throttleetc. is in front of it, it is much easier to ride. Curve also feels easier to turn.
[Included Parts:were they on? None in particular
[Was there anything that disappointed you? None in particular
Other items that would be helpful Point or hang of installation:Anyway, it is to do fine-tuning repeatedly. If you add a Switch box, you should fine-tune it, if you add an AxelSlot, you should fine-tune it, and repeat until you are satisfied.View Detail
Fits: SUZUKI GSR400 -12 *Ask to drill switch holes|* Normal side caps can be used., KAWASAKI BALIUS2 *Requires drilling of switch hole|* Requires side cap (for 18mm diameter), KAWASAKI ZEPHYR750 RS *Requires drilling of switch hole|* Requires side cap (for 18mm diameter), KAWASAKI ZEPHYRX *Requires drilling of switch hole|* Requires side cap (for 18mm diameter), KAWASAKI ZEPHYR750 *Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
Separate Handlebars were out of stock, so I put the Condor Handle on backwards and tilted it forward. It is very forward leaning and narrow, so I think it will be strange to use Large until I get used to it.
If you are going to reverse mount it, CondorSW looks better without interference to Tank. The product itself is very good, so it depends on how you attach it.
I only reverse-mounted it, so just for reference, Accelerator Wire and OthersWire can be used as they are. However, I think it would be better to change the wires if possible, since they seem to be in pain. The same can be said for any handlebar replacement, but I think a drill is necessary because it is necessary to drill holes to fix switches.View Detail
Fits: SUZUKI GSR400 -12 *Ask to drill switch holes|* Normal side caps can be used., KAWASAKI BALIUS2 *Requires drilling of switch hole|* Requires side cap (for 18mm diameter), KAWASAKI ZEPHYR750 RS *Requires drilling of switch hole|* Requires side cap (for 18mm diameter), KAWASAKI ZEPHYRX *Requires drilling of switch hole|* Requires side cap (for 18mm diameter), KAWASAKI ZEPHYR750 *Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
Fits: SUZUKI GSR400 -12 *Ask to drill switch holes|* Normal side caps can be used., KAWASAKI BALIUS2 *Requires drilling of switch hole|* Requires side cap (for 18mm diameter), KAWASAKI ZEPHYR750 RS *Requires drilling of switch hole|* Requires side cap (for 18mm diameter), KAWASAKI ZEPHYRX *Requires drilling of switch hole|* Requires side cap (for 18mm diameter), KAWASAKI ZEPHYR750 *Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
Fits: SUZUKI GSR400 -12 *Ask to drill switch holes|* Normal side caps can be used., KAWASAKI BALIUS2 *Requires drilling of switch hole|* Requires side cap (for 18mm diameter), KAWASAKI ZEPHYR750 RS *Requires drilling of switch hole|* Requires side cap (for 18mm diameter), KAWASAKI ZEPHYRX *Requires drilling of switch hole|* Requires side cap (for 18mm diameter), KAWASAKI ZEPHYR750 *Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
We are riding the ZrX400 of the 2006 year formula. Condor Handle interferes with Bikini cowl etc etc. I listen but I was able to install it without problems. Clear the Handlebar Clearance with Tank Thumb 1. Adjust with a gap of about 5 HandlebarRight Side's OEMBrake fluidTank? Felt it was Limit. Hose and Wire were still OEMs and there was no particular problem. It is necessary to open the hole for fixing Electrical Switch Series by yourself. Exchange time required time about 1 hour
Driving situation Thinking from Bar handle, it makes me feel a bit cramped, but for someone I like it does not accumulate. GSXetc. It feels like Separate handle. Corner is also easy to bend (There are individual differences) I feel like it got it.. Mirror became easier to see also the arm became low! View Detail
* The BEST and MUST store to find Japanese parts. * Register now for amazing deals and other special offers! *Over 800,000 listed items. It's hard NOT to find your parts.
SIGN IN TO WEBIKE JAPAN
Please enter email at least 6 characters.
Please enter a valid email address.
Email is already in use.
Your account has been banned.
Email address and/or password is not match.
Authentication with facebook fail.Please try again.
Please select How did you get to know about Webike Japan?
OR
YOUR ACCOUNT HAS BEEN CREATED!
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.
Get on your grid by register your motorcycle! About our "Mybike" service
"Easier to Search Items" It helps you to search items to fit for your motorcycle!
"Get Much Valuable Information" It helps you to get special deals, newly listed items and closeouts about your motorcycle!
"Easy to Register" It requires only your motorcycle manufacturer, model name and model year!