- Fits:
- YAMAHA MT03
- YAMAHA YBR250
- YAMAHA SEROW225
- YAMAHA YBR125
- YAMAHA XT250X
- ...and more.
收到这款YAMAHA Type E车衣让我比较惊喜,车衣银白和蓝色,虽然亮色感觉不是很耐脏,但是真的很抗脏,用了好久都看不出脏的地方,尺寸也比较合适,适合我的摩托车,底下有圆孔,防止刮大风被吹跑,有这个圆孔方便多了。用绳子系上。下雨刮风都不用担心。比较满意,价格还便宜 Read More - Fits:
- YAMAHA Cerro 250 3C54
- YAMAHA Cerro 250 3C55
- YAMAHA Cerro 250 3C53
- YAMAHA Cerro 250 3C56
- YAMAHA Cerro 250 3C52
- ...and more.
Overall this is a fantastic rack. Being a official Yamaha part it fits my 2008 XT250 (Serrow250) perfectly. It has low clearance above the rear fender, enough to get bungee straps under it but low eno...Read More - Fits:
- YAMAHA Cerro 250 1YBN
- YAMAHA Cerro 250 3C5Y|3C5M|3C5C|3C56|3C5S
- YAMAHA XT250X (5C13) 1YBN
- YAMAHA Cerro 250 1YBL|1YB9|1YBF
- YAMAHA XT250X (5C13) 3C5Y|3C5M|3C5C|3C56|3C5S
- ...and more.
This seat is an awesome upgrade for taller riders. Build quality is spot on and it significantly improves the ergos. Would DEFINITEY recommend.Read More - Fits:
- YAMAHA WR250RX 07-17 (3D7C)* The heat spot on the right side is not on the fingertip but on the palm of the hand
- so you may feel the temperature difference between the left and right side.
- YAMAHA WR250RX 07-17 (3D7B)*The heat spot on the right side is on the palm side
- not on the fingertip side
- so you may feel the temperature difference between the left and right side.
- ...and more.
Installed on TouringSEROW.Wiring, for example, was done without hesitation, referring to information on Net. The rest of the process, such as the extra wiring, required Sense, and I managed to put it ...Read More - Fits:
- YAMAHA Cerro 250 3C51
- YAMAHA Cerro 250 3C52
- YAMAHA Cerro 250 3C53
- YAMAHA Cerro 250 3C54
- YAMAHA Cerro 250 3C55
- ...and more.
Installed on Yamaha ST225 BRONCO.Installation is a snap!I installed it and promptly tipped it over.In the middle of the scrub, he was knocked off his feet by the incline and fell to the ground.I was d...Read More - Fits:
- YAMAHA Cerro 250 1YBN
- YAMAHA Cerro 250 3C5Y|3C5M|3C5C|3C56|3C5S
- YAMAHA XT250X (5C13) 1YBN
- YAMAHA Cerro 250 1YBL|1YB9|1YBF
- YAMAHA XT250X (5C13) 3C5Y|3C5M|3C5C|3C56|3C5S
- ...and more.
good pointIt doesn't hurt my ass.The higher the seat height is, the more room there is in the knees.A bad pointIt's an extra expense.OthersI wonder if Yamaha is using the Net for user registration, pe...Read More - Fits:
- YAMAHA Cerro 250 3C54
- YAMAHA Cerro 250 3C55
- YAMAHA Cerro 250 3C53
- YAMAHA Cerro 250 3C56
- YAMAHA Cerro 250 3C52
- ...and more.
[How is it used?I wanted to add a box to my SEROW and was looking for a Rear Carrier. This carrier of Y's Gear isIt didn't have the FinalSEROW fitment on it and only had the Large Threshold Carrier fo...Read More - Fits:
- YAMAHA Cerro 250 1YBN
- YAMAHA Cerro 250 3C5Y|3C5M|3C5C|3C56|3C5S
- YAMAHA XT250X (5C13) 1YBN
- YAMAHA Cerro 250 1YBL|1YB9|1YBF
- YAMAHA XT250X (5C13) 3C5Y|3C5M|3C5C|3C56|3C5S
- ...and more.
It's less painful on the butt than OEM, but it's only slightly better.In fact, the effect of High seat might be higher.I have improved the operation feeling.Read More - Fits:
- YAMAHA WR250R 3D71|2|3|4|5|6|7|8|9|A|B|C|D|E|G|F
- YAMAHA WR250F 5UMC|F|L|M|R
- YAMAHA WR250X 3D71|2|3|4|5|6|7|8|9|A|B|C|D|E|G|F
- YAMAHA XT250 3C51|2|3|4|5|6|7|C|M|S|Y
- YAMAHA tricker 5XT1|2|3|4|5|6|7|8|9|A
- ...and more.
I don't have to tell you, OEM Parts, what's the problem?The OEMO-ring part number for the WR250R is 93210-07135 for the small one and 93210-47675 for the large one.Read More - Fits:
- YAMAHA XT250X -17 (SEROW 250)
- YAMAHA SEROW250 -21
- YAMAHA XG250 TRICKER 04-20 5XT1|5XT2|5XT3|5XT4|5XT5|5XT6|5XT7|5XT8|5XT9|5XTA|5XTB|5XTC|18) XG250
I installed it shortly after the car was new, so I don't know if it's better or worse.I think it is good to install it if you are worried about the fine fee Ring because it doesn't have the impression...Read More - Fits:
- YAMAHA SEROW250 08-17 (Not available for carburetor models)
- YAMAHA XT250X 08-17 (Not available for carburetor models)
- YAMAHA XG250 TRICKER 08- (Not for carburetor models)
Post-install first ride impressions:
For city riding, I did not feel any difference in the ride. I felt the same handlebar and seat vibrations as I did pre-install. I sped up to 40 mph.
While goin...Read More - Fits:
- YAMAHA tricker 18-20
- YAMAHA XT250X -17
- YAMAHA Cerro 250 -21
[How is it used?Since I drive on the forest road, Under Guard is a necessity, so I have to choose between Other Brand Product or OEM Product of Y's Gear.I bought Y's Gear because my friend was using O...Read More - Fits:
- YAMAHA WR250RX 07-17 (3D7C)* The heat spot on the right side is not on the fingertip but on the palm of the hand
- so you may feel the temperature difference between the left and right side.
- YAMAHA WR250RX 07-17 (3D7B)*The heat spot on the right side is on the palm side
- not on the fingertip side
- so you may feel the temperature difference between the left and right side.
- ...and more.
It hasn't gotten cold yet, so this will be my impression of the installation, not the use!This time, it was installed in SEROW250!The most difficult part is to take out the Connector which connects Wi...Read More - Fits:
- YAMAHA WR250R 3D71|2|3|4|5|6|7|8|9|A|B|C|D|E|G|F
- YAMAHA WR250F 5UMC|F|L|M|R
- YAMAHA WR250X 3D71|2|3|4|5|6|7|8|9|A|B|C|D|E|G|F
- YAMAHA XT250 3C51|2|3|4|5|6|7|C|M|S|Y
- YAMAHA tricker 5XT1|2|3|4|5|6|7|8|9|A
- ...and more.
I haven't used it yet, but I'm sure it's OEM.I'm looking forward to the exchange.Read More - Fits:
- YAMAHA Cerro 250 3C54
- YAMAHA Cerro 250 3C55
- YAMAHA Cerro 250 3C53
- YAMAHA Cerro 250 3C56
- YAMAHA Cerro 250 3C52
- ...and more.
[How is it used?As Base to install Box of Hard case.Was the one you received as per Image?The carrier of SEROW250 is out of several companies from OEM to Other Brand Product, and I was worried about w...Read More - Fits:
- YAMAHA Cerro 250 3C51|3C52|3C53|3C54|3C55|3C56|3C57|3C5C|3C5M|3C5S
- YAMAHA Cerro 250 3C53
- YAMAHA Cerro 250 3C54
- YAMAHA WR250X 3D76
- YAMAHA WR250X 3D78
- ...and more.
[How is it used?I installed it on my 1998 SEROW225WE, which is a city driving Main.Was the one you received as per Image?Just like the image!This is a product that was already on the market before I s...Read More - Fits:
- YAMAHA Cerro 250 1YBN
- YAMAHA Cerro 250 3C5Y|3C5M|3C5C|3C56|3C5S
- YAMAHA XT250X (5C13) 1YBN
- YAMAHA Cerro 250 1YBL|1YB9|1YBF
- YAMAHA XT250X (5C13) 3C5Y|3C5M|3C5C|3C56|3C5S
- ...and more.
[Intended use]I bought this bike to improve my YamahaXT250X OEMSeat because the seat height is too low and my knees are too tight.[How is it used?I bought it and drove about 6000km.Was the one you rec...Read More - Fits:
- YAMAHA XT250X -17 (SEROW 250)
- YAMAHA SEROW250 -21
- YAMAHA XG250 TRICKER 04-20 5XT1|5XT2|5XT3|5XT4|5XT5|5XT6|5XT7|5XT8|5XT9|5XTA|5XTB|5XTC|18) XG250
After installing the YamahaPerformance damper on the XG250 TRICKER, the first thing I felt was that the motorcycle felt heavier than before. Especially, the Handlebar became heavier, and it was expres...Read More - Fits:
- YAMAHA Cerro 250 1YBN
- YAMAHA Cerro 250 3C5Y|3C5M|3C5C|3C56|3C5S
- YAMAHA XT250X (5C13) 1YBN
- YAMAHA Cerro 250 1YBL|1YB9|1YBF
- YAMAHA XT250X (5C13) 3C5Y|3C5M|3C5C|3C56|3C5S
- ...and more.
When I put it on, the difference is that there will be a slight gap on the Tank side.It does feel thicker than OEM. It's not dramatically softer.Gel zab is hard to wear, so I don't wear it.I've heard ...Read More - Fits:
- YAMAHA Cerro 250 3C51|3C52|3C53|3C54|3C55|3C56|3C57|3C5C|3C5M|3C5S
- YAMAHA Cerro 250 3C53
- YAMAHA Cerro 250 3C54
- YAMAHA WR250X 3D76
- YAMAHA WR250X 3D78
- ...and more.
The Size is also there and windproof and reduces the coldness of the hands in winter.However, because of the soft material, I do not expect much protection, and I do not think that it will be able to ...Read More
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING